Table of Contents
Is 1995 Chevy Silverado OBD1 or OBD2?
The 1995 TBI is OBDI and requires an OBDI scanner. A regular OBDI scanner will not work because you have a 16 pin OBDII connector. You’ll need one that is compatible with the OBDII type connector.
Where is the obd2 port on a 2002 Chevy Tracker?
The OBD II port in Your 2002 Chevy Tracker is located under the driver side of the dashboard below the steering column. There is a small plastic cover that You will need to remove to access the plug.
How do I run a diagnostic on my car?
Diagnose car problems with your smartphone or tablet
- Download the free software (Android/iOS)
- Plug the BlueDriver into your vehicle’s OBD II (On Board Diagnostic) port – find out where it is here.
- Pair the BlueDriver with your Android or iOS device.
- Fire up the app and start using it.
Where are the diagnostic connectors on a Toyota?
Locations: Near the left hand strut tower. Near the right hand strut tower. The Toyota test mode is a ‘more sensitive’ mode entered by connecting terminals TE2 and E1. If TE2 is not in the diagnostic connector there is no test mode. Locations: Under the drivers side dash panel. Locations: Near the left hand strut tower.
Where is the diagnostic port on a MY2015 Model S?
Please check the diagnostic connector of any MY2015 Model S prior to purchasing the harness. The diagnostics port can be found in the rear behind the lower center console panel. The diagnostics port can be found in the rear behind the lower center console panel. The diagnostics port can be found in the rear behind the lower center console panel.
Where is the GND pin on a 1993 Ford Probe?
I offer this as a FAQ for those with 1993-95 Probes. Basically, you can use a wire or a large paper clip to connect the GND pin to the TEN pin on your diagnostic connection. The connection is located in the front driver side corner under the hood, between the fender and the battery.
Are there two diagnostic ports in a harness?
The vehicle has two diagnostic ports — do not connect to the OBD II port. Please confirm the diagnostic port to ensure it is 16-pin OBD II prior to purchasing the harness. For diesel vehicles only and supported engine data from the optional FMS port inside the vehicle.