Why does my washing machine wash but not spin?
Normally, your washing machine won’t go into a spin cycle until it’s been drained. The drainage hose may become clogged with debris from your clothing, or it could be kinked. If the hose is kinked or crushed, it will likely need to be replaced.
Why does my washer keep saying unbalanced?
The suspension springs help to absorb the movement of the washer tub. If a suspension spring breaks, the tub might become unbalanced, causing it to shake and vibrate during operation. Inspect the suspension springs to determine if any of the springs are broken. If a suspension spring is broken, replace it.
Why won’t my washer drain all the way?
Your washer may have a clogged drain hose or the pump may be broken. A broken lid switch or belt could also be the culprit. It may even be something as simple as the hose being jammed. Whatever the reason, the water will need to be drained from the washing machine before any work or diagnosis can be done.
Why is there water under the drum of my washing machine?
Water In Bottom of Washing Machine Drum: Why It Happens Your lid mechanism is broken or not engaging fully. Your drain or hose is clogged. Your load was too large for a good spin cycle. Your washing machine’s sensors are damaged or old.
What does it mean if your washing machine is unbalanced?
• If a top load washer’s tub begins to bang against the sides of the washer when the spin cycle begins (before reaching top speed), this indicates a likely unbalanced load. Just pause the cycle and arrange the clothes in the basket and try again.
What does it mean when your washing machine wont spin?
If your washer won’t spin, it might signal a malfunction that requires a repairman, but oftentimes a simple DIY fix can get your washing machine working once more. Read on to determine the cause of your washer woes and which of them you can solve without hiring professional help.
Why does my washer bang against the side?
The most common causes are listed below: • If a top load washer’s tub begins to bang against the sides of the washer when the spin cycle begins (before reaching top speed), this indicates a likely unbalanced load. Just pause the cycle and arrange the clothes in the basket and try again.
Why does my washer not advance to the next cycle?
It’s the timer, if your washing machine fills with water and begins agitating, but the timer never advances–or if the washer is in a spin cycle and the timer won’t advance. Under the hole is a switch that allows the timer to advance and the washer to spin only when the lid is down.