Table of Contents
- 1 How do you reset the oil life on a Cadillac Escalade?
- 2 How do you reset the oil light on a 2007 Cadillac Escalade?
- 3 How do you reset the oil light on a 2009 Cadillac Escalade?
- 4 How do you reset the oil light on a 2012 Cadillac Escalade?
- 5 How to reset maintenance light on Chevy Silverado?
- 6 How do you change the oil in a Chevy Silverado?
How do you reset the oil life on a Cadillac Escalade?
Cadillac Escalade Oil Life Service Maintenance Light Reset
- Close all doors, gear to park position.
- Start the engine.
- Press the LEFT < button to select the LEFT SIDE MENU, then scroll down to the REMAINING OIL LIFE.
- While the REMAINING OIL LIFE is displayed.
- Turn off the ignition.
How do you reset the oil light on a 2007 Cadillac Escalade?
2007-2010
- Turn ignition switch to ON position with engine off.
- Press the MODE button until the DIC reads “Oil Life Left/Hold Set To Reset”
- Press and hold the SET button until the display reads “100 percent”
- You will hear 3 chimes and the “Change Engine Oil Soon” message will go off.
How do you reset the oil life on a 2014 Cadillac Escalade?
The oil life system can also be reset as follows:
- Turn the ignition key to position “ON” without starting the engine.
- Fully press and release the accelerator pedal three times within five seconds.
- Turn the ignition off and start the engine to verify the indicator has been reset.
How do you reset the oil light on a 2008 Cadillac Escalade?
How to reset oil service light Cadillac Escalade. From years: 2007, 2008, 2009, 2010.
- Turn the ignition to run (one position before starting engine).
- Display the OIL LIFE REMAINING on the DIC.
- Press and hold the SET/RESET button on the DIC for more than 5 seconds.
- The oil life will change to 100%.
How do you reset the oil light on a 2009 Cadillac Escalade?
The oil life system can also be reset as follows: Turn the ignition key to position “ON” without starting the engine. Fully press and release the accelerator pedal three times within five seconds. Turn the ignition off and start the engine to verify the indicator has been reset.
How do you reset the oil light on a 2012 Cadillac Escalade?
2012 CADILLAC Escalade Maintenance Light Reset Instructions
- Turn the ignition to run (one position before starting engine).
- Press the DIC button (i) until OIL LIFE REMAINING displays.
- Press and hold the SET/RESET (check mark) button for more than 5 seconds until 100% is displayed.
When to reset the Cadillac Escalade oil soon Minder?
When the remaining oil life is low, the Change Engine Oil Soon minder will appear on the display. The Oil Life display must be reset after each oil change. Follow the instructions below to reset the engine oil life system on your Cadillac Escalade:
How do I reset the oil change light?
Press the MODE button until the DIC reads “Oil Life Left/Hold Set To Reset” You will hear 3 chimes and the “Change Engine Oil Soon” message will go off Turn the key to the OFF position and back on to confirm reset successful
How to reset maintenance light on Chevy Silverado?
1 Turn ignition switch to ON position with engine off 2 Fully depress and release the accelerator pedal 3 times within 5 seconds of turning key 3 Change Oil lamp will flash for 2-10 seconds while it resets 4 Once it stops flashing, the maintenance light reset is complete
How do you change the oil in a Chevy Silverado?
Turn ignition switch to ON position with engine off. Press the MODE button until the DIC reads “Oil Life Left/Hold Set To Reset”. Press and hold the SET button until the display reads “100 percent”. You will hear 3 chimes and the “Change Engine Oil Soon” message will go off.