How much is an electronic throttle control?
Your Mechanic
| Work | Warranty | Price |
|---|---|---|
| Parts & Labour | 12 months | $195-$1410 |
How do you reset the electronic throttle control on a 2006 Dodge Charger?
Turn the key to the run position (vehicle not running). Push the accelerator pedal to the floor slowly and release slowly 3 times. Cycle the key and start up the vehicle. This could resolve the problem.
How do you reset the throttle body on a 2006 Dodge Charger?
Registered
- Insert ignition key and turn to “ON” (not start).
- Wait for all idiot lights to go out.
- Slowly depress the accelerator pedal all the way to the floor.
- Slowly release the accelerator pedal until it’s all the way back up.
- Turn the ignition key to “OFF”.
- Start the engine.
How do I know if my electronic throttle control is bad?
Rather than moving a cable, ETC uses sensors to inform the ECM of the position of the gas pedal, and when it fails, symptoms can be severe. Some of these include sudden idle surges and engine stalling, an engine light that flashes intermittently, or a massive drop in mileage.
What’s the problem with the electronic throttle control?
The wire to the TB is damaged or ther is a programe problem. gthis happened on my 03 Ram and it was athe wireing that was damaged. Sounds like the ETC (electronic throttle control) has an issue. It could be the wiring as suggested or it could be the ETC itself.
What to do if your throttle is not working?
There’s not much you can check yourself, you could check the wiring for the throttlebody and make sure its secure on the throttlebody and check to make sure the wires aren’t damaged. You could also pull the throttlebody off and check to make sure the throttle plate still moves.
What to do if your Dodge Charger is not running?
You could try to reset it yourself. Disconnect the battery for about 30 min. Disconnect the ETC connector and then plug back in. Turn the key to the run position (vehicle not running). Push the accelerator pedal to the floor slowly and release slowly 3 times. Cycle the key and start up the vehicle.